nav emailalert searchbtn searchbox tablepage yinyongbenwen piczone journalimg journalInfo journalinfonormal searchdiv searchzone qikanlogo popupnotification paper paperNew
2026, 02, v.42 183-200
Research advances in key materials and technologies for all-solid-state energy storage batteries
Email: wangtao2021@seu.edu.cn;
DOI: 10.19944/j.eptep.1674-8069.2026.02.002
Published:   2026-04-15
Publication Date:   2026-04-15
Mobile reading
Abstract:

[Objective]All-solid-state batteries, known for their high energy density and enhanced safety, are considered a highly promising next-generation energy storage technology. This paper aims to systematically review the progress in key materials and technologies for all-solid-state energy storage batteries, analyze their current challenges and future development directions, and provide references for related research, development, and optimization.[Methods]Through literature review, this paper first elaborates on the fundamental principles and research challenges of all-solid-state batteries. It systematically evaluates the research status and modification strategies for three key material categories: cathode, electrolyte, and anode, with a focus on the characteristics of oxide, sulfide, and polymer electrolytes, as well as LiCoO2, high-nickel ternary, and LiFePO4 cathodes, along with lithium metal, silicon, and carbon-based anodes. Furthermore, from the perspectives of key technologies such as interface engineering, structure and process optimization, and safety and cycle life enhancement, it discusses interface failure mechanisms and control strategies, fabrication processes such as multilayer stacking, hot pressing, and cold sintering, as well as strategies for lithium dendrite suppression and thermal runaway prevention.[Results]Analysis shows that strategies such as element doping, interface coating, composite structure design, and advanced manufacturing processes can effectively enhance the ionic conductivity of solid electrolytes, improve electrode/electrolyte interface stability, and suppress lithium dendrite growth, thereby improving the overall performance of all-solid-state batteries. The cited research works demonstrate significant progress in material modification and interface optimization.[Conclusion]All-solid-state batteries have broad application prospects in fields such as electric vehicles and high-end consumer electronics. However, their large-scale commercialization still faces challenges such as interface impedance, cost, and manufacturing processes. Future efforts require interdisciplinary collaboration and synergistic innovation in technologies such as materials genomics, artificial intelligence, advanced characterization, and simulation to drive the research, development, and industrialization of highperformance, safe, and low-cost all-solid-state batteries.

References

[1]俞颖.全球电力发展现状[J].电力科技与环保,2025,41(1):173.YU Ying. Global power development status[J]. Electric Power Technology and Environmental Protection,2025,41(1):173.

[2]李博,石红晖,马强,等.风电-火电-压缩空气储能综合能源系统运行特性研究[J].电力科技与环保, 2024, 40(2):168-177.LI Bo, SHI Honghui, MA Qiang, et al. The operating characteristics research of integrated energy system based on the wind, coal-fired power plant and compressed air energy storage[J]. Electric Power Technology and Environmental Protection, 2024, 40(2):168-177.

[3]康渭滨,寇明鑫,张文文,等.光伏储能电站不同储能形式经济性对比分析[J].电力科技与环保,2024,40(3):276-285.KANG Weibin,KOU Mingxin,ZHANG Wenwen,et al. Economic comparison analysis of different energy storage forms for photovoltaic energy storage power stations[J]. Electric Power Technology and Environmental Protection, 2024, 40(3):276-285.

[4]展浚哲,史泽中,汪涛.多元电化学储能技术综述[J].电力科技与环保,2024,40(3):237-249.ZHAN Junzhe,SHI Zezhong,WANG Tao. Overview of multivariate electrochemical energy storage technologies[J]. Electric Power Technology and Environmental Protection, 2024, 40(3):237-249.

[5]张晓会,王丹彤.基于《2025年能源工作指导意见》的思考[J].电池, 2025, 55(3):561-564.ZHANG Xiaohui,WANG Dantong. Thoughts based on the guidance on energy work in 2025[J]. Battery Bimonthly,2025,55(3):561-564.

[6]CHEN R J, QU W J, GUO X, et al. The pursuit of solid-state electrolytes for lithium batteries:From comprehensive insight to emerging horizons[J]. Materials Horizons,2016,3(6):487-516.

[7]权国辉,张庆莉,邹金华.超级电容器电极材料的研究与发展趋势[J].电池,2025,55(2):360-367.QUAN Guohui,ZHANG Qingli,ZOU Jinhua. Research and development trends of electrode materials for supercapacitor[J].Battery Bimonthly,2025,55(2):360-367.

[8]ZHAO N,MU S,GUO X X. Physical issues in solid garnet batteries[J]. Acta Physica Sinica,2020,69(22):228804.

[9]KIM J,JUN A,GWON O,et al. Hybrid-solid oxide electrolysis cell:a new strategy for efficient hydrogen production[J]. Nano Energy, 2018, 44:121-126.

[10]MURUGAN R,THANGADURAI V,WEPPNEr W. Fast Lithium Ion Conduction in Garnet-Type Li7La3Zr2O12. Angewandte Chemie International Edition, 46:7778-7781.

[11]FU K,GONG Y,Dai J,et al. Flexible, solid-state, ion-conducting membrane with 3D garnet nanofiber networks for lithium batteries[J]. Proceedings of the National Academy of Sciences of the United States of America, 2016, 113(26):7094-7099.

[12]GAI J L, ZHAO E Q, MA F R, et al. Preparation and electrochemical properties of Li7La3Zr2O12 solid electrolyte via a coprecipitation method[J]. Journal of the European Ceramic Society, 2018, 38(4):1673-1678.

[13]CHENG L, WU C H, JARRY A, et al. Interrelationships among grain size, surface composition, air stability, and interfacial resistance of Al-substituted Li7La3Zr2O12 solid electrolytes[J].ACS Applied Materials&Interfaces, 2015, 7(32):17649-17655.

[14]CHEN Y Y, YAN X X. Electrical properties and sinter ability of Y-doped Li7La3Zr2O12(Y-LLZO)synthesized by solid-state reaction for the solid electrolyte of all solid-state lithium-ion battery[J]. Ceramics International, 2025, 51(16, Part B):22910-22917.

[15]JIANG J L, WANG Q L, CUI J, et al. Improved electrical transport properties in Ga/Ta co-doped LLZO under high temperature and pressure[J]. Applied Physics Letters, 2025,126(21):213902.

[16]SHEN X, ZHANG R, CHEN X, et al. The failure of solid electrolyte interphase on Li metal anode:Structural uniformity or mechanical strength[J]. Advanced Energy Materials, 2020,10(10):1903645.

[17]DEWEES R, WANG H. Synthesis and properties of NaSICONtype LATP and LAGP solid electrolytes[J]. ChemSusChem, 2019,12(12):1-15.

[18]LYU M, LI Y, ZHANG C, et al. Crystal structure engineering enhances ionic conductivity in LAGP solid-state electrolytes[J].Chemistry-A European Journal, 2025, 31(27):e202500820.

[19]ONG S P, MO Y, RICHARDS W D, et al. Phase stability,electrochemical stability and ionic conductivity of the Li10±1MP2X12(M=Ge, Si, Sn, Al or P, and X=O, S or Se)family of superionic conductors[J]. Energy&Environmental Science, 2013,6(1):148-156.

[20]SHUAI J, LI H D, JIA X B, et al. Interface engineering in LGPS-type solid-state electrolytes for all-solid-state lithium batteries[J].FlatChem, 2024, 46:100693.

[21]WEBER D A, SENYSHYN A, WELDERT K S, et al. Structural insights and 3D diffusion pathways within the lithium superionic conductor Li10GeP2S2[J]. Chemistry of Materials, 2016, 28(16):5905-5915.

[22]张文杰,任东生,吴勇,等. Li10GeP2S12基全固态电池关键材料的热稳定性研究[J].储能科学与技术,2025,14(6):2193–2199.ZHANG Wenjie, REN Dongsheng, WU Yong, et al. Thermal stability of key materials in Li10GeP12S2-based all-solid-state batteries[J]. Energy Storage Science and Technology, 2025, 14(6):2193-2199

[23]KLUETERR S, WANG Y, KALLON E, et al. Atomic layer deposited aluminum nitride for interface protection of lithium germanium thiophosphate solid electrolytes[J]. Journal of Vacuum Science&Technology A, 2025, 43:032404.

[24]WENAEL S, SEDLMAIER S J, DIETRICH C, et al. Interfacial reactivity and interphase growth of argyrodite solid electrolytes at lithium metal electrodes[J]. Solid State Ionics, 2018, 318(SI):102-112.

[25]CUSSEN E J. Structure and ionic conductivity in lithium garnets[J]. Journal of Materials Chemistry,2010,20(25):5167–5173.

[26]YANG J,WAN Y,JIANG Z,et al. Lanthanum and oxygen codoping of lithium argyrodite for enhanced humid air stability and lithium metal compatibility[J]. Electrochimica Acta, 2025, X(X):146619. DOI:10.1016/j.electacta.2025.146619.

[27]陈泽华,杜丽.氟化碳酸酯基准固态聚合物电解质的性能[J].电池, 2025, 55(3):451-455.CHEN Zehua, DU Li. Performance of fluorinated carbonatebased quasi-solid polymer electrolyte[J]. Battery Bimonthly,2025, 55(3):451-455.

[28]刘玉龙,辛明杨,丛丽娜,等.聚氧乙烯基聚合物固态电池的界面研究进展[J].物理学报, 2020, 69(22):228202.LIU Yulong, XIN Mingyang, CONG Lina, et al. Recent research progress of interface for polyethylene oxide based solid state battery[J]. Acta Physica Sinica, 2020, 69(22):228202.

[29]CHENG J, HOU G M, SUN Q, et al. A novel coral-like garnet for high-performance PEO-based all solid-state batteries[J]. Science China Materials, 2022, 65(2):364-372.

[30]TARASCON J M, GOZDZ A S, SCHMUTZ C, et al. Performance of Bellcore’s plastic rechargeable Li-ion batteries[J]. Solid State Ionics, 1996, 86–88(Pt 1):49-54.

[31]肖围.锂离子电池用复合型PVDF-HFP基聚合物电解质的制备及性能研究[D].长沙:中南大学, 2013.XIAO Wei. Study on the preparation and performances of PVDFHFP based composite polymer electrolytes for lithium-ion batteries[D]. Changsha:Central South University, 2013.

[32]佘宇坤,项程程,王小玉,等.含溴化铈的聚合物电解质在锂氧电池中的应用[J].功能高分子学报,2022,35(5):484-492.SHE Yukun,XIANG Chengcheng,WANG Xiaoyu,et al.Application of polymer electrolytes incorporating cerium bromide in lithium-oxygen batteries[J]. Journal of Functional Polymers,2022, 35(5):484-492.

[33]童敏飞,田芳硕,李梦成,等.PAA/LAGP共混改性PVDF-HFP基固态电解质的制备及其在固态电池中的性能[J].浙江理工大学学报(自然科学版),2025,53(6):766-773TONG Minfei,TIAN Fangshuo,LI Mengcheng,et al. Preparation of PAA/LAGP blended modified PVDF-HFP-based solid electrolyte and its performance in solid-state batteries[J]. Journal of Zhejiang Sci-Tech University(Natural Sciences Edition),2025,53(6):766-773

[34]PULS S, et al. Benchmarking the reproducibility of all-solid-state battery cell performance[J]. Nature Energy, 2024, 9:1310-1320.

[35]MIZUSHIMA K, JONES P C, WISEMAN P J, et al. LixCoO2(0<1):A new cathode material for batteries of high energy density[J].Solid State Ionics, 1980, 127(4):171-174.

[36]ZHANG X, LIU Y, WANG D, et al. Surface engineering for high voltage LiCoO2 in halide all-solid-state lithium-ion batteries[J].Electrochimica Acta, 2025, X(X):146052.

[37]郑传佐.高镍三元正极材料的表面改性及其在固态电池中的电化学性能研究[D].湘潭:湘潭大学, 2022.ZHENG Chuanzuo. Surface modification of high nickel ternary cathode and electrochemical performance in solid state batteries[D].Xiangtan:Xiangtan University, 2022.

[38]HUANG S Y,LUO B,ZHANG Z X,et al. Effect of crystal morphology of nickel-rich cathode materials on electrochemical stability and ion transport kinetics of sulfide-based all-solidstate batteries[J/OL]. Chinese Chemical Letters, 2024:110729[2025-07-13]. https://doi.org/10.1016/j.cclet.2024.110729.

[39]张国耀.基于磷酸铁锂正极与无机固态电解质间的界面改性研究[D].天津:天津理工大学, 2024.ZHANG Guoyao. Interface modification between lithium iron phosphate cathode and inorganic solid-state electrolytes[D].Tianjin:Tianjin University of Technology, 2024.

[40]JIN F,LI J,HU C,et al. High performance solid-state battery with integrated cathode and electrolyte[J]. Acta Physico-Chimica Sinica, 2019, 35(12):1399-1403.

[41]LIANG S S,KANG S S,YANG D,et al. Interficial engineering of lithium metal anode for sulfide solid state batteries[J]. Acta Chimica Sinica,2022,80:1264-1268.

[42]YU P, ZHANG H,HUSSAIN F,et al. Lithium-rich antifluorite solid electrolytes for stable lithium metal solid-state batteries[J]. Journal of the American Chemical Society, 2024, 146(20):12681-12690.

[43]OHTA R, HIRAOKA T, SHIBANO Y, et al. Influence of structural characteristics of a Si nanoparticulate anode on allsolid-state Li-ion batteries[J]. Journal of Physics D:Applied Physics, 2024, 57(16):164002.

[44]DENG Y, FENG X H, QIAN Z L, et al. Silicon anode modification strategies in solid-state lithium-ion batteries[J]. Materials Horizons,2025. DOI:10.1039/d5mh00434a.

[45]LI X,ZHANG L,FAN Y Y,et al. Carbon interconnected microsized Si film toward high energy room temperature solidstate lithium-ion batteries[J]. Chinese Chemical Letters,2025,36:109776.

[46]张博,张贺贺,马妍姣.钾离子电池硬碳负极材料研究进展[J].电力科技与环保,2024,40(3):221-236.ZHANG Bo,ZHANG Hehe,MA Yanjiao. Research progress of hard carbon anode materials for potassium-ion batteries[J].Electric Power Technology and Environmental Protection, 2024,40(3):221-236.

[47]ABDILLAH O B, ISKANDAR F, RUS Y B, et al. Recent progress on reduced graphene oxide and polypyrrole composites for high performance supercapacitors:A review[J]. Journal of Energy Storage, 2023, 74:109300.

[48]ZHANG L, SHEN M, LI C, et al. A lithium-reduced graphene oxide composite anode with high wettability and fast ionic conductivity for dendrite-free solid-state lithium metal batteries[J]. Journal of Power Sources, 2024, 603:236164.

[49]LIU Y, XU X, JIAO X, et al. Role of interfacial defects on electrochemo-mechanical failure of solid-state electrolyte[J]. Advanced Materials, 2023, 35(15):2301152.

[50]KIM K H, IRIYAMA Y, YAMAMOTO K, et al. Characterization of the interface between LiCoO2 and Li7La3Zr2O12 in an all-solidstate rechargeable lithium battery[J]. Journal of Power Sources,2011, 196(2):764–767.

[51]孙华章,万红利,姚霞银. Na-In/Na2S界面层实现稳定的全固态钠电池[J].储能科学与技术, 2025, 0405:2095-4239.SUN Huazhang, WAN Hongli, YAO Xiayin. Na-In alloy/Na2S interface layer enables stable all-solid-state sodium batteries[J].Energy Storage Science and Technology, 2025, 0405:2095-4239.

[52]HARUYAMA J, SODEYAMA K, HAN L Y, et al. Space charge layer effect at interface between oxide cathode and sulfide electrolyte in all-solid-state lithium-ion battery[J]. Chemistry of Materials, 2014, 26(14):4248-4255.

[53]ZHANG W B, RICHTER F H, CULVER S P, et al. Degradation mechanisms at the Li10GeP2S12/LiCoO2 cathode interface in an allsolid-state lithium-ion battery[J]. ACS Applied Materials&Interfaces, 2018, 10(26):22226-22236.

[54]SAKUDA A, HAYASHI A, TATSUMISAGO M. Sulfide solid electrolyte with favorable mechanical property for all-solid-state lithium battery[J]. Chemistry of Materials, 2010, 22(3):949-956.

[55]LIU C, LI W, DENG K, et al. A stable all-solid-state lithium metal battery achieved by optimizing the cathode-electrolyte interface through perovskite-coating-stabilized single crystal LiNi0.9Co0.05Mn0.05O2cathode[J]. Chemical Engineering Journal,2025, 517:164576.

[56]LIU H,LU Y,LIU Y,et al. A preoxidation strategy to establish stable oxide cathode/halide solid-state electrolyte interfaces for high energy all solid-state batteries[J]. Small, 2025. DOI:10.1002/smll.202412647.

[57]NI K H, CHEN Z L, LI C C. Densification and stress distribution within the sintered structure of ceramic electrolytes for all-solidstate Li-ion batteries[J]. Acta Materialia, 2024, 275:120057.

[58]廖明辉,杨东旭,周莹,等.玻璃纤维布基多层复合固态电解质的制备与性能[J].储能科学与技术,2022,11(10):3090-3099.LIAO Minghui, YANG Dongxu, ZHOU Ying, et al. Preparation and properties study of glass fiber cloth-based multilayer composite solid electrolyte[J]. Energy Storage Science and Technology, 2022, 11(10):3090-3099.

[59]赵春霞,薛建强,张永杰,等. PPy/CS复合电极热压成型工艺优化[J].化工学报, 2016, 67(10):4514-4520.ZHAO Chunxia, XUE Jianqiang, ZHANG Yongjie, et al. Optimization of hot press molding conditions for making PPy/CS composite electrodes[J]. CIESC Journal, 2016, 67(10):4514-4520.

[60]冯静静,章游然,马名生,等.冷烧结技术的研究现状及发展趋势[J].无机材料学报,2023,38(2):125-136.FENG Jingjing,ZHANG Youran,MA Mingsheng,et al. Current status and development trend of cold sintering process[J]. Journal of Inorganic Materials, 2023, 38(2):125-136

[61]GUO J,BERBANO S S,GUO H Z,et al. Cold sintering process of composites:bridging the processing temperature gap of ceramic and polymer materials[J]. Advanced Functional Materials, 2016,26(39):7115-7121.

[62]迟上森.锂/钠电池负极材料及固态电池界面研究[D].北京:北京科技大学,2023.CHI Shangsen. Research on lithium/sodium battery anode materials and solid-state battery interface[D]. Beijing:University of Science and Technology Beijing, 2023.

[63]KANG H K,WOO S G,KIM J H,et al. Conductive porous carbon film as a lithium metal storage medium[J]. Electrochimica Acta,2015, 176:172-178.

[64]RYOU M,LEE D J,LEE J,et al. Lithium ion batteries:excellent cycle life of lithium-metal anodes in lithium ion batteries with mussel-inspired polydopamine-coated separators[J]. Advanced Energy Materials, 2012, 2(6):645-650.

[65]KOZEN A C,LIN C F,PEARSE A J,et al. Next-generation lithium metal anode engineering via atomic layer deposition[J].ACS Nano, 2015, 9(6):5884-5892.

[66]ZHENG G,LEE S W,LIANG Z,et al. Interconnected hollow carbon nanospheres for stable lithium metal anodes[J]. Nature Nanotechnology, 2014, 9(8):618-623.

[67]YAN K,LEE H W,GAO T,et al. Ultrathin two-dimensional atomic crystals as stable interfacial layer for improvement of lithium metal anode[J]. Nano Letters, 2014, 14(10):6016-6024.

[68]LU G,DONG Z,LIU W,et al. Universal lithiophilic interfacial layers towards dendrite-free lithium anodes for solid-state lithium-metal batteries[J]. Science Bulletin, 2021.

[69]张明杰,杨凯,刘振,等.钠离子电池热安全性研究进展[J].电池,2025,55(2):368-375.ZHANG Mingjie,YANG Kai,LIU Zhen,et al. Research progress in thermal safety for sodium-ion battery[J]. Battery Bimonthly,2025,55(2):368-375.

[70]叶兴联,钟志韬,张楚城,等.储能电池模组风冷和液冷换热特性对比[J].电力科技与环保,2025,41(2):173-182.YE Xinglian,ZHONG Zhitao,ZHANG Chucheng,et al.Comparison of heat transfer characteristics between air-cooled and liquidcooled energy storage battery modules[J]. Electric Power Technology and Environmental Protection,2025,41(2):173-182.

[71]ZHANG J X,LI Y Z,MA L J. Study on the effect of aging on thermal runaway behavior of lithium-ion batteries under different heating positions[J]. Applied Thermal Engineering,2025,280(Part 1):127793.

[72]陈诗瑶.高性能准固态电解质的原位制备及其对锂电池热安全性的改善研究[D].合肥:中国科学技术大学,2024.CHEN Shiyao. In-situ preparation of high-performance quasisolid-state electrolyte and its improvement on thermal safety of lithium batteries[D]. Hefei:University of Science and Technology of China, 2024.

[73]CHEN X,ZHAO H A,ZHANG X Y,et al. Homogeneous microphase structure and polymer-dominated ion transport network enable durable quasi-solid-state sodium metal batteries[J]. Advanced Functional Materials, 2025:202527023.

[74]LIU Q S,AN H W,WANG X F,et al. Effective transport network driven by tortuosity gradient enables high-electrochem-active solid-state batteries[J]. National Science Review, 2023, 10(3):nwac272. DOI:10.1093/nsr/nwac272.

[75]沈昊天,张华良,徐玉杰,等.基于多元目标的储能政策综合评估[J].电力科技与环保,2025,41(2):229-239.SHEN Haotian, ZHANG Hualiang, XU Yujie, et al.Comprehensive evaluation of energy storage policies based on multiobjectives[J]. Electric Power Technology and Environmental Protection, 2025, 41(2):229-239.

[76]朱法华,徐静馨.双碳背景下中国与主要发达国家电力低碳转型比较[J].电力科技与环保, 2024, 40(6):561-571.ZHU Fahua,XU Jingxin. Comparison of low-carbon transformation in electricity between China and major developed countries under the background of carbon peaking and carbon neutrality[J].Electric Power Technology and Environmental Protection, 2024,40(6):561-571.

[77]胡传芳,张忠山,陈敏.电化学储能技术在电力系统中的应用现状[J].电池,2025,55(2):382-388.HU Chuanfang,ZHANG Zhongshan,CHEN Min. Application status of electrochemical energy storage in new power system[J].Battery Bimonthly, 2025, 55(2):382-388.

Basic Information:

DOI:10.19944/j.eptep.1674-8069.2026.02.002

China Classification Code:TM91

Citation Information:

[1]HUANG Jing,YUAN Wenlu,WANG Tao.Research advances in key materials and technologies for all-solid-state energy storage batteries[J].Electric Power Technology and Environmental Protection,2026,42(02):183-200.DOI:10.19944/j.eptep.1674-8069.2026.02.002.

Fund Information:

国家自然科学基金面上项目(22279016); 东南大学至善青年学者(A类)经费(2242024RCB0004)

Published:  

2026-04-15

Publication Date:  

2026-04-15

quote

GB/T 7714-2015
MLA
APA
Search Advanced Search