下载排行
Kinetics and reaction mechanism of selective catalytic reduction of NO by WO3-ZrO2/TiO2-CeO2-MnO_2
SONG Jing;JIN Qijie;JI Wenyu;XU Mutao;DAI Yi;XU Haitao;At present,the main application of industrial treatment of NO_xis efficient and stable selective catalytic reduction(SCR) denitration technology.In order to study the denitrification catalyst for waste incineration industry,WO3-Zr O2/Ti O2-Ce O2-Mn O_2catalyst is prepared by co-precipitation method combines with impregnation method for selective catalytic reduction of NO.The thermodynamics are investigated and its activation energy is calculated.Results show that for WO3-Zr O2/Ti O2-Ce O2-Mn O_2catalyst,the conditions for approximate elimination of internal and external diffusion are:particle size of 0.25~0.38 mm,catalyst mass of 0.1~0.2 g,and gas flow rate of 667~1 000 m L/min.Under these conditions,when WO3-Zr O2/Ti O2-Ce O2-Mn O_2catalyst is used for NH3-SCR,the reaction order of O_2and NH_3was 0,and the reaction order of NO is 1.It is found that apparent reaction activation energy of WO3-Zr O2/Ti O2-Ce O2-Mn O_2catalyst is 33.3 k J/mol,which is relatively lower than apparent reaction activation energy of different existing catalysts.Therefore,it has excellent catalytic performance for NH3-SCR.Meanwhile,-NH2~*reacts with monodentate nitrite and bidentate nitrate at low temperature to generate N_2and H_2O,so it follows the Langmuir-Hinshelwood (L-H) mechanism.NH4~+reacts with gas phase NO to generate N_2and H_2O,and it follows Eley-Rideal (E-R) mechanism.At high temperature,NH4~+reacted quickly with gas phase NO to generate N_2and H_2O,so that follows E-R mechanism.Therefore,WO3-Zr O2/Ti O2-Ce O2-Mn O_2catalyst simultaneously follows E-R and L-H mechanisms at low temperatures,and mainly follows E-R mechanism at high temperatures.
Discussion on key problems and practice analysis for MSW incineration CDM project development in China
ZUO Yi,WANG Sheng,CAO Ruo-yanBased on the development status of MSW incineration CDM projects in China,the characteristics are analyzed and compared from different angles.Some problems during the global stakeholder process are summarized and the main revision points of the methodology are illustrated.On the basis of a real project case,discussion is emphasized on investment analysis and common practice analysis in the additionality assessment,and conclusions and some suggestions are presented in the end.
Numerical simulation study on load adaptability under co-firing of biomass gas and coal
WANG Xilun;LIU Ping;CHU Wei;ZHANG Chong;WU Guoqiang;ZHANG Chaoqun;LI Ming;Biomass Energy has the property of natural carbon neutralization. "Double Carbon" target, China's energy green and clean alternative steps to speed up. Using biomass instead of a certain proportion of coal powder to realize mixed combustion, it provides a kind of technical thinking of source coal removal and carbon reduction for the transformation of coal-electricity storage. In order to evaluate the combustion characteristics of a coal-fired coupled biomass boiler, the combustion characteristics of a 660MW supercritical pulverized coal-fired boiler under different loads after coupled biomass power generation were studied based on three-dimensional numerical simulation software, to master the adaptability of biomass pulverized coal co-combustion under different loads. The results show that biomass blending can adapt to different operating loads and meet the requirements of flexible operation of thermal power units. Under 330MW and 450MW operating loads, when the blending ratio is 9% and 7% respectively, the co-combustion of pulverized coal and biomass gas has no effect on the normal combustion structure of the furnace.There is no high temperature corrosion risk when the furnace wall is in oxidation atmosphere.The carbon content of fly ash increases under 330MW load.The carbon content of fly ash decreases from 2.4% to 1.67% at 450MW load.The ratio of reducing gas to co-combustion is about 30% at Gasification load compared with pulverized coal load.The injection into the burned area of pulverized coal has a certain reduction effect on NOx, so the concentration of NOx emission is reduced to some extent, NOx emission concentration decreases from 316 mg/m3 to 290 mg/m3, the reduction range is about 8%.
Research progress of manganese-based low-temperature SCR denitrification catalysts
LI Fangxiao;LIU Jinhao;WANG Ruiting;MA Jingwen;[Objective]Vanadium-based catalysts face challenges such as poor low-temperature activity and susceptibility to poisoning in selective catalytic reduction (SCR) technology,while manganese-based catalysts have emerged as a research hotspot due to their excellent low-temperature performance.This paper systematically reviews the types,structures,and anti-poisoning strategies of manganese-based catalysts to promote their industrial application in denitrification.[Methods]By summarizing recent studies,manganese-based catalysts are categorized into multi-meta manganese oxides and supported catalysts (metal oxides,carbon-based materials,molecular sieves).Anti-poisoning strategies include:1) Metal doping (e.g.,Fe,Ce,Ni) to optimize redox properties;2) Carrier optimization (e.g.,TiO_2carbon composites) to enhance dispersion and stability;3) Morphological design (e.g.,nanorods,core-shell structures to inhibit sulfate deposition.[Results]Metal doping significantly increases the Mn4+ratio,e.g.,Fe-Mn/TiO2 achieves97.7%NO conversion at 150°C.Carrier optimization,such as TiO2-supported Mn catalysts,maintains stability under H_2O for 10 days.Morphological modifications,like MnOx/CeO2 nanorods,show no activity loss after 1000 hours in 572 mg/m SO2.Bimetallic doping (e.g.,Fe:Co molar ratio 2:4) improves sulfur resistance by 30%.[Conclusion]Manganese-based catalysts exhibit enhanced low-temperature activity and anti-poisoning performance through multi-component doping carrier synergy,and structural design.However,challenges such as long-term stability,impacts of multi-pollutants (e.g.heavy metals,VOCs),and cost require further investigation.Future research should focus on eco-friendly modifications and in-situ mechanistic studies to facilitate industrial adoption.
Reactive power optimization based on particle swarm optimization algorithm
LIU Jianhang;ZHANG Dier;This paper are using the modified algorithm for power system reactive power optimization mathematical model of optimization calculation according to the actual situation of power system reactive power optimization problem and the basic principle and characteristics of particle swarm optimization algorithm. Then,we use the MATLAB program of the improved algorithm,combined with the formula to calculate optimization program,and results show the algorithm study the feasibility and effectiveness of reactive power optimization by use the IEEE6 standard node system simulation results.
Key points of Environment Impact Assessment of power grids plan
LI YanThe project of the Environment Impact Assessment(EIA)of Guangzhou urban high-voltage power grid plan is a demonstration of Ministry of Environmental Protection.Some research such as appraisal system,standard,methods of assessment have been practiced in the project.Several key points of Environment Impact Assessment of power grids plan are put forward.
Experimental research on the mixing combustion technique of pulverized coal with mud
WANG Xue,LI Duo-songThe application experiment of the mixing combustion technology with mud on pulverized coal furnace was introduced.The effect on the boiler pulverized system caused by the mud water ratio was concluded.It was discovered that there were no effluence on the furnace chamber temperature after the mud was added through a series of experiments.It was also discovered that the combustion efficiency were decreased,the flue gas concentration and the SO2 concentration were decreased with the increase of the mud ratio.
Surge damage to laser diode and its elimination
Surge produced reason and its harmness is analyzed,a few effective methods to eliminate it are introduced.A practical power circuit for laser diode is provided.Some points should be care in laser diode application are suggested.